Our spas only use $25 – $30… Unlike most hot tubs that cost $80 – $200 per month to operate, and that’s based on LIPA rates!!
This is because of many factors:
- All spas have full foam insulation, which locks in the heat.
- High-density foam covers, which are custom-made for each tub to fit tight around the edges.
- 85% of the heat generated by the pumps is returned to the water, so you’re getting free heat.
- Filtration, heating, and sanitation are driven by low-power, 98-watt circulation pumps.
- Our hot tubs are expertly engineered and plumbed so that the pumps are best utilized, ensuring that there is no wasted energy or horsepower. This means a smaller more efficient pump that gives you more jet power than our competitors.
Jacuzzi’s patented jets spin without bearings… which means they will continue to spin forever, unlike bearing jets that can stick over time. And the massage they give you is unlike any other. Once you feel a Jacuzzi® jet you’ll never want anything else. Come check out the PowerPro MX Jets and the premium FX2 Spinners…but don’t miss the FX10 Therapy Seat!
When you sit in a Jacuzzi® hot tub, you won’t want to get out! Each seat is designed to support your body evenly, with correct posture. You will be fully immersed in the water, so your whole body can feel the incredible massage. From the deep recessed jets to the adjustable headrest pillows, you’ll just melt away…but not float away! Our non-float lounges will keep you in place, right where you want to be. And you’ll also love the large footwells, so you’re not playing “footsies” with your friends…unless you want to.
Clean Water – Naturally
Jacuzzi uses a three-stage, top to the bottom cleaning process. The water never stops moving due to the ProStream filtration pump, which moves 35 gallons per minute. First, the water surface is cleaned by the ProClear skimmer, then it goes thru the ProClarity filtration system, which itself is a two-stage filtration process. There’s also a filter inlet in the footwell, so any sand or particles on the bottom get sucked out. Lastly, the CLEARRAY Water Purification System will sanitize the water, so you use virtually no chemicals!
Shells That Last
If you want your hot tub to be around for a long time, the shell is the most important component. Jacuzzi’s patented Tri-Fusion process produces shells that are eight times stronger than conventional shells. They use a vinyl ester bonding layer between the acrylic and the rigidizing layer, which eliminates the possibility of blistering, cracking, or delaminating. And the rigidizing layer is made from special resins similar to those used in the aerospace industry.
Jacuzzi gives you peace of mind with their ProPolymer Foundation. This one-piece, ABS base will never rot, rust or decay. Insects and rodents can’t penetrate it, and it also helps insulate your hot tub, so you don’t get heat loss thru the bottom.
Total Backyard Experience
Wait until you see a Jacuzzi® Hot Tub at night! With the double WaterColour waterfalls on the J400s, the lighted adjustable pillows, the lighted logo on the step, the lighted drink holders, and the PowerPro IX jet lighting up the water, it’s simply amazing. Combine that with the J1000 Audio System, and you’ll be the center of your neighborhood.
Need something you do not see?
Call us at (631)-HOT-TUB to speak to one of our knowledgeable sales representatives.
We Can’t Wait To Hear From You!
Contact us below for a home or virtual consultation, or visit us at either our Bohemia or Bellmore showroom.